What You Need To Know About Epoxy Pipe Lining

Plumbing is a crucial service that ensures safe and clean water for domestic and commercial use. Unfortunately, it’s also a job that requires extensive training and knowledge. While there is much information about plumbing online, it can be misleading and perpetuate myths. If you’re looking for a quick and easy solution to your plumbing problems, Epoxy Pipe Lining is the way to go. This trenchless technology allows you to restore your pipes without disrupting your property’s landscape or architecture.


Epoxy Pipe Lining

Trenchless epoxy pipe lining is less invasive and environmentally friendly than traditional pipe repair methods. It can also help you save on recurring plumbing fees and costs. This method involves lining the interior of your pipes with a durable epoxy resin that can last up to 50 years. It can be used for a wide range of pipe sizes and types, including PVC and cast iron. You can use this solution to reduce blockages, increase your flow capacity, and protect the integrity of your sewer system.

A qualified plumber will inspect your pipes using CCTV sewer cameras and non-invasive cleaning methods to find the cause of the issue. Once they have determined the source of the problem, they can apply an epoxy sleeve to the inside of your existing pipes. This will fill the pinholes and prevent future corrosion. The sleeve will also reduce the chances of future clogs and reduce the overall diameter of your piping system.

Trenchless pipe lining is an efficient way to rehabilitate your aging drainage and sewer pipes. It requires a minimal amount of disruption to your home or business, and is often performed from existing access points. In addition, this method is significantly cheaper than the cost of a traditional repipe.

A qualified plumber will use CCTV sewer cameras to inspect your drains before applying an epoxy lining. They will also perform a thorough cleaning of your pipes. This process will ensure that the lining is properly applied and adheres to your piping structure. The plumber will then test the liner for structural integrity and chemical resistance. The PrimeLiner Resin, which is commonly used in this technique, has a high level of chemical resistance and superior strength. It is a great choice for pipe lining in residential, commercial, and industrial buildings.


When pipes corrode, they can cause leaks that can damage your home or office. Fortunately, a new technique called epoxy pipe lining is an effective way to repair these pipes without tearing up floors or breaking down walls. This technique involves coating the inside of your existing pipes with epoxy resin, creating a new lining within the old pipe. This process is also known as cured-in-place pipelining (CIPP).

This noninvasive method can save you time and money. It is up to eight times less expensive than traditional methods and requires no excavation. It is also environmentally friendly and doesn’t create any waste.

Epoxy is an ideal material for relining because it’s highly durable and corrosion resistant. In addition, it is able to withstand high temperatures and pressures. It is also non-toxic, making it safe for drinking water. This is important because the water supply in your building or home may contain contaminants such as lead, zinc, and cadmium. These contaminants can leach into the drinking water and cause health issues.

Before the lining process begins, the team will inspect your pipes using a camera or physical inspection. They will also clean and prepare the pipes for lining. The pipes must be free of blockages and clogs to ensure that the epoxy will adhere properly. Failure to do so will result in de-lamination of the epoxy, which will expose the underlying pipe to corrosion.

During the lining process, the team will saturate a woven felt material with an epoxy resin. They will then insert the material into the pipe and inflate an inner bladder, which will shape the liner to the pipe. It takes four hours for the epoxy to cure, forming a new pipe structure.


Epoxy pipe lining is a long-term solution that can last up to 50 years. It is also highly corrosion-resistant and can withstand high temperatures and pressures. Unlike traditional sewer repair methods, which require excavation and demolition of buildings, epoxy pipe lining is a non-invasive solution that avoids disruption to the building and its surroundings. However, this technique is not without its disadvantages, and it’s important to know what to watch out for.

Before a technician can apply an epoxy resin liner, they must first inspect your drain system to determine whether it is suitable for the process. If they find that your pipes are collapsed or too fragile, they will provide an alternative solution. After the inspection, they will thoroughly clean the drain system by using hydro jetting, and then use specialized equipment to apply the epoxy lining. This entire process is done without digging, and it takes just 24 hours to complete.

Once the lining is applied, it must be cured to ensure that it sticks properly to the interior of the pipe. Curing can be accomplished in a number of ways, including hot water, steam, or UV light. It is important that the curing be done correctly, as an improper installation can cause the liners to slip or break.

Aside from being a less expensive option than traditional repiping, the epoxy lining is also environmentally friendly. It uses fewer materials than other methods, and it reduces the amount of waste that is sent to landfills. Additionally, this method eliminates the need for excavation and demolition, which can save you money in the long run. It is an excellent choice for commercial and residential properties that need to address corrosion-related issues.


When compared to traditional excavation methods, epoxy pipe lining is an efficient option for repairing your sewer lines. It is also cheaper and less invasive, making it the best choice for homeowners. Moreover, it doesn’t require you to dig up your yard or landscape and preserves the elegance of your property. In addition, it saves you money in recovery costs for the damaged lawn and flower beds.

This technique is called trenchless relining, and it has become popular in the recent years because it eliminates the need for digging. It is used for a wide range of applications, including commercial and residential plumbing systems. It is especially useful for older cast iron and clay pipes. It can be used to repair drains, sewer pipes, water mains, and other underground pipes in homes, apartments, schools, hospitals, airports, and businesses.

The first step in this process is an evaluation of your current pipes to determine whether they are suitable for epoxy lining. Then, a plumber will clean your pipes and prep them for the epoxy application using hydro jetting. Once the pipes are ready, the epoxy sleeve is applied and allowed to cure. The curing time takes about eight hours.

Epoxy pipe lining is a great solution for old, corroded pipes. It is an effective way to prevent future damage and increase the longevity of your pipes. It can also help you save energy by reducing the amount of water lost through leaks and corrosion.

However, it is important to remember that the epoxy sleeve will be irreversibly attached to the inside of your pipe after its installation. Therefore, it is important to schedule the procedure in advance.


Pipe lining is a non-invasive repair solution for aging pipes. It doesn’t require excavation, so it’s much faster than traditional repiping methods. It’s also environmentally friendly and safe for your home. It uses a special resin that’s resistant to corrosion and is not toxic for your family or pets. Unlike PVC, it doesn’t contain harmful chemicals or leach into water supplies.

A plumbing professional can easily repair your leaking drain pipes using this method, and it doesn’t require breaking down walls or floors. It’s a great option for older homes that have cast iron and clay drain lines. It also helps avoid expensive repiping repairs and replacements.

During this process, a soft sleeve-like product is soaked in special resins and inserted into the existing pipes. Once the sleeve is in place, an internal bladder is inflated to press it against the pipe wall. The epoxy resins then harden, creating a “pipe-within-a-pipe.” The sleeve will protect the pipe and prevent future blockages and leaks.

Epoxy pipe lining can be installed in both residential and commercial properties, and it’s more cost-effective than repiping. The pipe coating process is fast, and it’s also a greener alternative to traditional sewer relining methods. It can also be used in water supply pipes, heat and air ducting, and electrical conduits.

During the process, plumbers will use existing access points, such as cleanouts, to line your pipes. If you don’t have any access points, they can create a new one for you. The entire process can be done in a day or less, saving you the time and money that comes with digging and repairing pipes. In addition, the slick inner coating increases flow and minimizes the risk of clogs.